Recovery Point Ford Ranger PX / Mazda BT50 - GEN2 2011-On RPRAN02

These tow points have been designed specifically for Ford Ranger PX PX2 and Mazda BT-50 Gen 2 (2011 on) .

Designed to fit with standard bumper and factory alloy bar, they have been destruction tested and put through real-life recovery situations.

These tow points have been designed for use with 4.75T bow shackles which are available separately.

All tow points have been designed for straight line pull-type recoveries and are not to be used for lifting purposes.

This is a quality, reliable product with the following features; Made from 18mm SS41 carbon steel plate

Direct bolt onto your chassis using high tensile bolts - no cutting or welding required

Powder coated yellow for high visibility

Matched pair - specific to each side Allow for use of 4.75T bow shackles and a bridle strap

Rated to a Working Weight Limit (WWL) of 5000 Kg per tow point

To suit: Ford Ranger PX PX2 Mazda BT-50 Gen 2 2011 on

Note: As tow points are designed based on a standard vehicle, if your vehicle has any aftermarket parts installed (eg; bull bar, nudge bar, bash plate, etc.) this may affect fitment.

Please see link for manufacturers fitment guideline.

Kit contains: 2 x Tow Points All bolts, nuts and washers required for fitting

Part No. RP-RAN02

Note: On some late model vehicles the passenger side will need the holes enlaged to suit the tow points and the tow point may require some minor trimming